Percorrer por autor "Grosche, Lucas"
A mostrar 1 - 3 de 3
Resultados por página
Opções de ordenação
- Characterization of Lignocellulosic Byproducts from the Portuguese Forest: Valorization and Sustainable UsePublication . Macena, Morgana; Gonçalves Oliveira Valente da Cruz-Lopes, Luísa Paula; Grosche, Lucas; Santos-Vieira, Isabel; Esteves, Bruno; Pereira, HelenaThe increasing emphasis on environmental sustainability has placed biomass as a versatile and renewable resource, while the management and disposal of forest byproducts remain a significant challenge. This study explores the valorization of forest biomass residues derived from Pinus pinaster, Pinus pinea, and the invasive species Acacia dealbata, with a focus on their potential application as bioadsorbents. A comprehensive physicochemical characterization was conducted for different biomass fractions (leaves, needles, and branches of varying diameters). Leaves and needles contained higher amounts of extractives (from 7.7% in acacia leaves to 18.8% in maritime pine needles) and ash (3.4 and 4.2% in acacia leaves and stone pine needles, respectively), whereas branches contained more holocellulose (from 59.6% in P. pinea small branches to 79.2% in P. pinaster large branches). ATR-FTIR and pHpzc analyses indicated compositional and surface charge differences, with higher pHpzc values in A. dealbata relative to Pinus. TG analysis showed that acacia large branches degraded at a lower temperature (320 °C) compared to Pinus species (440–450 °C). Overall, the findings highlight the suitability of these underutilized forest byproducts as bioadsorbents, contributing to the advancement of circular economy practices.
- Lignocellulosic Byproducts as Bio-Adsorbents for Lead RemovalPublication . Macena, Morgana; Pereira Helena; Grosche, Lucas; Esteves, Bruno; Santos-Vieira, Isabel; Gonçalves Oliveira Valente da Cruz-Lopes, Luísa PaulaWater pollution by toxic metals, especially by lead ions, is a serious environmental concern due to these metals’ persistence, bioaccumulation, and toxicity. Aiming to reduce metal concentrations to non-toxic levels, this study analyzed the removal of lead from water through adsorption with bio-adsorbents. The adsorbent potential of the following four lignocellulosic byproducts were tested: walnut and chestnut shells, pine wood, and burnt pine wood. Removal rates of 97–99% were achieved at optimized conditions, i.e., at a pH of approximately 7, adsorbent dose of 4 g L−1, and 12 h of reaction. The BET specific surface area was between 1.74 and 4.85 m2 g−1. The pore size of the wood bio-adsorbent was 26.54 nm, and those of the remaining materials were between 5.40 and 7.33 nm. With R2 = 0.998–1.000, the kinetics fit the pseudo-second-order model better, suggesting that chemisorption is the dominant mechanism. Both Langmuir and Freundlich isothermal models fit the data well, with R2 = 0.946–0.999. It can be concluded that all the bio-adsorbents tested have the potential to efficiently remove lead ions from water.
- Valorization of Pinecones as Biosorbents for Environmental Remediation of Zn-Contaminated WastewatersPublication . Macena, Morgana; Gonçalves Oliveira Valente da Cruz-Lopes, Luísa Paula; Grosche, Lucas; Esteves, Bruno; Santos-Vieira, Isabel; Pereira, HelenaEmpty pinecones are a largely available byproduct of Pinus pinea L. nut production, mostly concentrated in the Mediterranean area; e.g., in Portugal, around 70,000 tons of pinecones are produced annually. One valorization line for residual biomass is its use as biosorbents for the removal of contaminants in effluents and water courses which are an increasing environmental problem. This study explores the biosorbent potential of pinecones to remove zinc ions from aqueous solutions. We analyzed the morphology and chemical composition of pinecones (9.4% extractives, 37.0% lignin, 68.6% holocellulose, 1.4% ash). The effect of pH and adsorbent dose on the adsorption process was studied, as were the sorption kinetics and isotherms. The pinecones showed good potential to remove Zn ions, with 96% removal at pH 7 and a maximum adsorption capacity of 7.92 mg g−1 . The process followed the Freundlich isotherm model, indicating a heterogeneous surface and multilayer adsorption, and the pseudo-second-order kinetic model, suggesting chemisorption as the dominant mechanism. The use of pinecones as bio-adsorbent is therefore a green and low-cost alternative for environmental remediation and biomass waste management.