Browsing by Author "Can, Ahmet"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Determination of some wood properties and response to weathering of Citrus limon (L.) Burm woodPublication . Şahin, Sırrı; Ayata, Umit; Bal, Bekir Cihad; Esteves, Bruno; Can, Ahmet; Sivrikaya, HüseyinOrange is a fruit of the Citrus genus in the family Rutaceae. It is assumed to have originated in southern Asia, and to have been first cultivated in China around 2500 BC. There is little knowledge on the quality of wood from orange trees, which is occasionally used in fine woodwork, tool handles, mosaics, and marquetry. This work aimed to evaluate the possibility of using orange wood from agricultural conversions and orchard plantation renewals to make products with a high value. Logs from plantations located in southern Italy were collected, and the key aspects for determining the suitability of using the wood as flooring were examined. Laboratory tests were carried out to determine the shrinkage, dimensional stability, and surface hardness, which included an indentation test on the wood flooring. Drying trials were also performed, and prototypes of flooring were prepared so professionals and end users could evaluate the aesthetic value. The results confirmed that the wood from orange trees is fine-grained, and is characterized by a high density and shrinkage, average dimensional stability, and high surface hardness. The results of the tests suggested performing careful drying and following specific procedures according to the size of the elements. The wood was highly appreciated by the users, which confirmed the possibility of using this wood as a renewable raw material, despite the limited availability, for manufacturing high-quality products.
- Effects of artificial weathering on the surface properties of coated radiata pinePublication . Sahin, Sirri; Esteves, Bruno; Can, Ahmet; Sivrikaya, Hüseyin; Domingos, Idalina; Ferreira, José; Ayata, ÜmitRadiata pine boards were coated with two different methods A and B both beginning with a hydro primer and finishing with a mat oil but method A using an acrylic high gloss coating and method B three layers of an acrylic sealer in between. The samples were subjected to aging processes for 144 h, 288 h, and 432 h by using UV-A 340 nm lamps. The CIE L*a*b* and CIE L*C*H* coordinates were determined (L*, a*, b*, C*, ho *, ΔE*), gloss (perpendicular ( ) and parallel (//) to the grain at 20°, 60°, and 85° angles) and surface adhesion strength via the pull-off method were tested before and after weathering. Results have shown that lightness (L*), decreases with weathering for both varnish applications with a higher decrease for the B coating system. Redness increased for both applications with no significant differences. At the same time there was a yellowing of the samples along the weathering period. Parallel and perpendicular gloss decreased for 20º and 60º angles while it increased for 85º angle. The adhesion strength of method A was higher and its decrease with weathering was smaller than for method B. Both varnish applications have proven to confer some protection against wood discoloration, but method A showed the best results and is therefore the best method to be used by radiata pine.